You can help keep your vehicle's steering system operating properly by checking its power steering fluid at least once per year and topping it off if necessary.
Before you begin
- Be sure to consult your Owner Guide to determine the proper power steering fluid to use
- Start the engine and let it run until the temperature gauge reaches the center of the normal area between H and C
- With the engine idling, turn the steering wheel until it stops left and right several times
- Turn off the engine
- Locate the Power Steering Reservoir and wipe it clean with a rag
- Check the fluid level in the reservoir. If it is between the "MIN" and "MAX" lines, you do not need to add fluid
- If the fluid is below the "MIN" line, remove the cap and add fluid in small amounts until it reaches the proper range - do not fill above the "MAX" line
- Replace the cap and make sure it is tight
For more detailed information and illustrations on how to check and add power steering fluid, be sure to consult your vehicle's Owner Manual.
